Table of Contents
Important Note
The “Matrix42 Enterprise Manager for SCCM (EM)” also contains all public released hotfixes that are available for previous versions.
Please note that installing this update will request a reboot of the system.
Enterprise Manager for SCCM 19.0.3 Setup can be used:
- To perform a new installation
- To perform an update based on the version Enterprise Manager 7.3.x
- To perform an update based on the version Enterprise Manager 19.0.2.x
Attention: An update from older versions is not possible and will not be supported by Matrix42.
Installation Instructions
You must be familiar with the content of the following documents before you start the installation or update process:
- Release Notes (click here for German and here for English)
- System Requirements (click here for German and here for English)
If anything is unclear or you have any questions, please contact Matrix42 before you perform the installation or update.
All EM components should be updated. It is not supported to mix different versions in one environment.
Preliminary Actions before Installation
Important Note: When you are downloading a Matrix42 hotfix or patch, the downloaded file may have a Zone. Identifier information attached (depending on your browser's security configuration.
Please remove this Zone. Identifier, otherwise some problems with this files can occur (files are not loading correctly):
- Right-click the blocked file, then click Properties.
- Under the General tab, click Unblock.
To avoid the Zone. Identifier in the future, please add the addresses https://m42cdneu01.blob.core.windows.net and https://m42marketplacemediathek.blob.core.windows.net as a "trusted zone" in the Internet Explorer.
New Installation
EM Server
Run EM Server Setup and follow the steps. The manual installation is documented in the Matrix42 help center (de / en). Alternatively, you can run the installation of the server components silent. The instructions for silent installation also available in the Matrix42 help center (de / en).
EM Distribution Point
Run EM Distribution Point Setup on every SCCM Distribution Point Server and follow the steps or use alternative/automated installation methods. The installation of these components is also documented in the Matrix42 help center.
EM Agent
Run EM Distribution Point Setup on every SCCM Distribution Point Server and follow the steps or use alternative/automated installation methods. The installation of these components is also documented in the Matrix42 help center.
Update from Version 7.3.x / 19.0.2.x
The following steps must be performed to do an update of Enterprise Manager for SCCM Version 7.2.x / 19.0.2.x:
EM Server
- Create a full backup of your EM database.
- Create a full image, or at least an image of the EM Server file system.
- Run Server Setup and follow the instructions.
The main setup launches a migration wizard that converts all objects in the database to the new version.
In the event of any errors, a new View Log button is displayed. Click this button to open a file containing detailed information in front of other windows. In the case of errors, this file must be saved and kept for analysis purposes.
- Once the migration wizard has completed successfully, further steps are performed by the setup function.
- Setup is now complete, and the EM master server has been successfully updated. We recommend updating the Distribution Points used by Enterprise Manager next.
If you have switched your web console to SSL/ HTTPS, please check this after the update. By default, the HTTP port is used again.
EM Distribution Point
Run the EM Distribution Point Setup and follow the steps or use alternative/automated methods for updating the EM-DP service.
EM Agent
Run EM Agent Setup on the client computers and follow the steps or use alternative/automated methods for updating the EM Agent.
Changes in Version 19.0.2
If you are using OS Deployment with the Enterprise Manager version 7.3.1, then you MUST delete all generated Device Collections with hashes before you create new OSD tasks with version 19.0.2!
| Description | Affected Components |
|---|---|
| SCMM 1906 support | |
| DB optimization (complete) | |
| Data imports (complete) | |
| EmImport Log in the webconsole | |
| Threshold level for all imports (if 95% success the Import overall status is success) | |
| Computer name with more than 15 characters is not allowed | |
| Show EM Inventar when no SCCM Agent is installed | |
| Show correct Login History in Inventory | |
| Enhanced Report management | |
| DP Logs are not deleted (Service restart) | |
| Computer list is not displayed in reports | |
| Using UUID or MAC to create a Computer in OS Deployment | |
| SCCM Application Supersedence support | |
| PRB33277: Computerimport in Tasks nach EM Upgrade fehlerhaft | |
| PRB33293: OSD Verhalten des neuen Agents fehlerhaft | |
| PRB33292: Fehler bei Collection-Erstellung und Berechnung | |
| PRB33338: Service Import Failed after update to 7.3.2 | |
| PRB33383: OSD-Bestellungen enthalten sämtliche Computer | |
| PRB33319: EM-Agent blockiert durch SCCM Task | |
|
PRB33286: "+" wird im Text (Show Info Action) nicht angezeigt, wenn im Hyperlink ein "+" vorhanden ist Important note: You need to open and save each Show Information action in order for the display to work properly. |
|
| PRB33550: Rerun bei fehlerhafter Bestellung startet nicht | |
| PRB32798: Eventlog-Warnings mit EM-Server Exceptions | |
| PRB33517: Anzeige der Error Messages bei Bestellungen fehlerhaft | |
| PRB33582: EM 7.3.2.19199 - Package upload fails for single Packages over the API | |
| PRB33583: EM 7.3.2.19199 - EmImport service crash after update from single Package or Application | |
| PRB33654: EM - Client-Cache beim 7.3.2er Agent wird sofort nach der Installation komplett gelöscht. | |
| PRB33378: Enterprise Manager Dependency Management | |
| PRB33008: EM - Action Sonderzeichen | |
| PRB33628 - Location Manager werden in der Oberfläche nicht angezeigt | |
| PRB33685 - Last appointment Zeit kommt auf Client falsch an | |
| PRB33650: Enterprise Manager Software Installationen nach Neustart | |
| PRB32773: EM - Restart Computer Action | |
| PRB33579: Anzahl der importierten SCCM Packages ist falsch | |
| PRB33267: Keine Bilder in Berechtigungsmail |
Changes in Version 19.0.3
| Description | Affected Components |
|---|---|
| SCCM 1910 support | |
| SCCM Server Resolve XML column (allow password length 255 characters) | |
| OSD job restart is now possible | |
| Enterprise Manager Server Job Management integrated (Collections, Computergroups, Events, Patch Management, Permissions, Reports, Server, TaskEM, TaskOSD, TaskPatch, TaskSCCM) | |
| Distribution Point Job Management integrated (AutoUpdate, Customizing) | |
| "Start task again" possible for failed computer objects in mass rollouts | |
| "CurrentlyNotAvailable" Status in EM- Agent is set to 7 days | |
| PRB33788: Enterprise Manager Dependency Management | |
| PRB33849: SCCM Package Import Error #INC150044 | |
| PRB33820: EM 19.0.2.19270 - Migrationerrors | |
| PRB33916: Error im EM bei Teams und Applications 19.0.2.19301 | |
| PRB33914: Software download mit Agent 6.6 nicht möglich | |
| PRB33881: EMv7.3.2 - betr: Clients mit Status disabled | |
| PRB33966: Fehler SCCM Push Job Erstellung | |
| PRB33967: Packages und Application lassen sich nicht installieren (No DP found) | |
| PRB33917: EMv7.3.2 - Application Install for User | |
| PRB33908: Import "Teams" schlägt fehl | |
| PRB33877: Rolloutpläne enthalten Sequenzen doppelt | |
| PRB33940: Probleme mit Reports in 19.0.2 | |
| PRB33876: Installationsstart von Last appointment Zeit wird vom EM Agent nicht korrekt umgesetzt | |
| PRB34017: Bug bei den Berechtigungen | |
| PRB33925: Haken bei User Auswahl bleibt nicht gesetzt! | |
| PRB33939: EMv7.3.2 - Client Cache wird nach Update von 6.2 auf 7.3.2 direkt gelöscht |
Known Issues in Version 19.0.3
| Description | Affected Components |
|---|---|
| The v7 agent does not provide feedback to the EM Server Monitoring, only use for EM Server and v6 agent | EM-Server |